What is a MTNL Jio FiOS Settlement? ( mtnl Issues) mtnl Issues

When the world was introduced to Jio, a new entrant in the Indian telecom scene, there were quite a number of people that thought that the company would never be able to compete with its rivals due to their huge cost advantages over the other telecom players in the country, let alone have the potential to take on its competitors head on with a single network and brand name. This was actually a common opinion among all the telecom players in the country and it was a bit surprising for a few others when the new company was able to raise the question of a lawsuit against their biggest rival who had been the most formidable in terms of sheer size of their market and influence over the market.

What You Did Not Know

Jio did not hesitate to make the most of its power to sue its rival and in the process proved that even small players in the field of telecom could not ignore a lawsuit of this kind and there were many more reasons for the telecom players to stay away from Jio at the same time as they were also keen to avoid a lawsuit, which they knew would cost them lots of money. However, it seems that Jio did not use its full strength and was contented with only a small part of the money they had in its hands as a result. It is obvious that the company did not want to spend that much of money on a lawsuit but when it was required to do so, it used all its resources at the best possible cost, as a way of getting out of the situation before its legal case got started. Also check ip address and jiofi-local-html.

The legal case between the two major telecommunications companies was actually a matter of fraud as the telecom companies had taken advantage of the fact that Jim did not have any IP address as their own, and had set up multiple fake accounts under different IP addresses to make the prices go down while still making money off of their customers.

What More?

This means that the entire case between Jio and its competitors was actually nothing more than a scam and fraud by the telecoms companies that had been engaging in such practices. Hence, there was no real reason for them to sue Jio in the first place. All the money that was lost by the competition during the first round of the Jio FiOS tariff has been recovered by the telecom companies and the competition was allowed to remain intact, although it must be remembered that there were a lot of reasons why the competition in the market was being affected and there were a lot of reasons why the Jio service could have been a very successful in this market, even without having the threat of a lawsuit from the competitors.

MORE ARTICLES ON msigevents.org

How to change avatar in LOL

League of Legends or LOL is one of the most popular multiplayer online battle arena (MOBA) game. It is fun to play for it requires teamwork, strategy, and surviving skills. This also enhances your cooperative side as well as your communication.

Aside from being a game, it is also a community where players can communicate with one another. So, as much as possible, users would want to personalize their account.

Things like adopting a personal username and changing the icon are just few examples. So, if you wonder how you can change avatar in LOL, read along to find out. 


Change Avatar in LOL

There are different modes when you play LOL. But one of the most prestigious of which is when you become a player for Challenger spot. Actually, you can create your own Challenger avatar that you can use for your profile. Here is how to change avatar in LOL.  

  1. First, prepare the image that you want to assign as an avatar. 
  2. Next, open LOL on your computer and go to your profile where the avatar can be found.
  3. Now, click on the change avatar button and upload your picture.
  4. Save the changes you’ve made and you’re ready to go. 

Having trouble uninstalling showbox on your device? Here are some tips.

And that’s it! You will be able to update your avatar and personalize your profile or account by following the steps mentioned above. It’s pretty easy and straightforward so you won’t get lost in the process. 

In case you have questions or inquiries with LOL, you can sign up for their forum. Through that, you’ll be able to get in touch with other players as well as the developer. Likewise, you may leave a comment at the box below. We will make sure to get back to you the soonest time possible. -MSIG Events Group.

Uninstall Showbox on your Device Using These Methods

Have you decided to uninstall Showbox on your device but still don’t know how to do it? Did it ruin your smartphone or you just don’t like its features? Here, I am going to share with you the easy ways on how you can uninstall the Showbox app on your smartphones and computers. You can also use these steps to uninstall any other app on your device.

Uninstall Showbox

Many of the smartphone users today are downloading an app even if they don’t know what really it is. Or, they just don’t liked the features of that particular application – like Showbox. I am not saying that Showbox is not a good app. But maybe for some, it doesn’t match their taste when it comes to media entertainment tool.

Actually, Showbox is one of the best media streaming applications which one can use to stream any video/movie/TV show. However, some of the reputable security websites have listed Showbox as one of the malicious applications. They found out that Showbox can interfere with your internet browser and redirect you to sponsored web pages and can also alter with other applications which are available on your device.

Thus, it is advised to avoid using Showbox due to security and privacy issues. If you already have Showbox installed on your device, then there are specific methods which you can use to uninstall Showbox from your device. The method is different for almost every operating system. So, check the following methods to uninstall Showbox from your particular device.

You can also learn from our free How to Guides on fixing WiFi IP Configuration Issue and default login IP and password of routers.

Ways on How to Uninstall Showbox

As what is stated earlier, uninstalling Showbox is different depending on the operating system you are using. So, we will try to discuss each method on every OS including Android and Windows.

#1. Uninstall from Android Devices

There are three ways on how you can uninstall Showbox on Android devices. Since Android runs on many different smartphone’s brands and models, the first and second method of uninstalling may also be slightly different. But it is much the same in such a way that:

First method: You just need to press and hold the application and move it in the trash bin that appeared on your screen. That trash bin indicates that the app will be uninstalled from the device once you drop it there.

Second method: Open the app drawer on your device. On the App Search bar, there are three dots that aligned vertically. Click that dots and it will allow you to edit and sort the arrangement of the apps on the drawer. Click the “minus sign” on the corner of the Showbox icon to uninstall.

Android second method

Third method:

Step 1. Go to your device Settings and click “Apps.”

Android Apps settings

Step 2. Find Showbox on the list of the apps installed on your device and click on it.

Select Showbox

Step 3. Once the information about Showbox displayed on your screen, click the “Uninstall” button.

Showbox uninstall button

Step 4. The last step that you need to do is to click OK. Once you hit that, you already deleted Showbox on your device, so make sure that you really wanted to uninstall it. Otherwise, you have to download Showbox again.

Uninstall Showbox

#2. Uninstall from Windows PC

Since you used an Android emulator on your PC to install Showbox, you also have to use it to uninstall Showbox. Let’s say you used Bluestacks as the emulator:

Step 1. Open or launch Bluestacks on your Windows PC. You can see the list of the installed apps.

Open Bluestacks

Step 2. Click the three dots on the upper left corner of the Bluestacks window and select “Delete Apps.”

Bluestacks Delete Apps

Step 3. Click the “X” button that appeared on the corner of the Showbox icon.

Showbox delete button

Step 4. Click the “OK” button to uninstall Showbox.

Uninstall button

#3 Uninstall using Malware bytes.

Step 1. If you do not have the software, download and install Malware bytes Anti-Malware software in your device.

Step 2. Launch Malware bytes Anti-Malware software once it has finished installing.

Step 3. If you already have this software, make sure that it has been updated. To ensure it is updated click “Update Now” from the Dashboard.

Step 4. Click on the large “Scan Now” button on the dashboard to perform a scan with Malwarebytes Anti-Malware software of your device.

Step 5. Once the scan is completed, click on the Remove Selected option and then, select Showbox from the list and then, click the Finish button or restart your computer depending on the situation.

You can also use other similar software such as CCleaner, HitmanPro, etc. The method might vary a bit but the structure remains the same.

In Conclusion

These were some of the easiest methods on how to uninstall Showbox from your device and get rid of any threat. We’re not sure if you can install Showbox on iOS devices that’s why we did not include uninstalling from iPhone/iPad and Apple computers.

If you know any other way of uninstalling Showbox, please let us know in the comment section below. You can also leave your questions and queries regarding Showbox app and we’ll be glad to help you as much as we can.

How to Fix “WiFi Doesn’t Have a Valid IP Configuration” Issue

WiFi Doesn't Have a Valid IP Configuration

Did you just see your Windows troubleshooter shows the “WiFi Doesn’t Have a Valid IP Configuration” notice? I know how much bummer that is but there is no reason for you to panic. That is an easy to fix kind of problem and by the time you finish reading this whole article, you’re already surfing your way through the internet again.WiFi Doesn't Have a Valid IP Configuration

If you are thinking of coding your way to fix this connectivity issue, you’re right. There will be some code-typing actions. But the good news is it won’t be as difficult as you might think. It will be just some few short phrases so there is no need for you to get a headache while doing this. In fact, it’s so simple that you will be able to do it on your own the next time this problem happens.

Anyway, I know you are now so eager to fix the “WiFi Doesn’t Have a Valid IP Configuration” issue so here it is. We have prepared a couple of methods for you just in case one is not enough to fix the problem. Sometimes, the Windows encounter different issues but still showing the same notification or warning.

Fix “WiFi Doesn’t Have a Valid IP Configuration” Issue

Method 1: Winsock Reset

  1. First is to open the Command window by pressing Windows key + R and typing CMD then hit ENTER.
  2. As soon as the Command window appears, type in the netsh winsock reset and press ENTER.
  3. Then type this another command line: netsh int ip reset
  4. Press ENTER and then close the Command window.
  5. Restart your PC and then open a browser to check if the issue still persists.

Method 2: Manual IP Address

Note that with this method, you will be switching from DHCP which is an automatic leasing of an IP address from your router to Static. We will be manually putting an IP address of your choice while still using the router’s default gateway and DNS server.

  1. In this method, we need to access the Network Settings of your Windows operating system. For Windows 7 users press the Windows key and on the Start menu click the Control Panel. You will find the Network and Sharing Center. From there, click the Adapter Settings and you will see the Network Interface Controller.
  2. For Windows 8, 8.1, and 10 users, just open the Run windows by pressing Windows key + R then type NCPA.CPL and press ENTER.
  3. Click Properties and from the new window, scroll down and look for TCP/IPv4. Double-click on that to open the Properties again.
  4. On the new window, change from Obtain IP Address Automatically to Use the Following IP Address.
  5. On the IP address blank bar, type or any number from 10 to 99.
  6. Type on the Subnet Mask line and on the Default Gateway.
  7. Actually, this is a bit tricky because not all routers have the same default gateway. In order for you to get the exact default gateway, you need to go back to the Ethernet Status and click Details. The IPv4 Default Gateway is listed there among other IP addresses. Use that instead of the common or If it turns out that it is the same then you do not need to change anything.
  8. On the Obtain DNS Server Address Automatically, change it to Use the Following DNS Server Addresses.
  9. Type in the and subsequently.
  10. Click OK to close the window and another OK to close all other windows.
  11. This should fix the “WiFi Doesn’t Have a Valid IP Configuration” issue.

Method 3: Remove Antivirus Software

Sometimes, the antivirus that you installed is the main culprit for losing your internet access. It could be due to a bad update or some malicious software was detected on your network software. So in order to prevent the virus to do its damage, the antivirus blocks the network card software.

If this method works, then that’s when you install a different antivirus or reinstall your old antivirus and do a full scan afterward. Just test and observe which software is affecting your internet connection each time you install one.

Method 4: Reinstall Network Driver

There are cases where it’s the main driver of the network card is causing the connectivity issue. It could be a bug or a recent operation created an error in the driver software that is controlling the network card’s activities. If that is the case, here is what you should do.

  1. First is to download a new driver version of your current Network Adapter.
  2. Save it on your local drive or in the Download folder for later use.
  3. Now go to your Control Panel. By this time I assume that you already know how to access the Control Panel on Windows. If not, just press Windows key + R and type Control Panel and press ENTER.
  4. On the Control Panel, look for the Device Manager.
  5. A new window will appear listing all the hardware installed with their drivers. Look for the Network Adapter and click the NIC that you need to fix. Right-click on it and choose Uninstall to remove the driver.
  6. Restart your PC after you uninstall.
  7. When the PC reboots, go to the network adapter driver that you downloaded earlier. Launch the installer and wait till it finishes the installation process.
  8. Restart the PC again for changes to take effect.

In Conclusion

Let’s hope that these methods will work for you. If not, perhaps the problem is with your router or modem. Restart them just to be sure. Or better yet, reset them back to their factory default by pressing the reset button at the back for good 10 seconds before letting go. Note that with this method, your WiFi SSID and password might need some setting up again. Just use your default login username and password to fix it.

If that still did not do anything good. Then it is time that you should call your Internet Service Provider (ISP). The problem could be from their end. So calling should somehow give you an idea or a fix.

If you have other questions, feel free to leave a message in the comment section. We will answer them as soon as possible. And if you know people with similar problem, be kind and share this article to them so that they could fix this issue themselves. Default Login, Password and IP

For using the internet provided by an internet service provider, we need to use a router. There are numerous routers manufactured by various companies such as D-Link, TP-Link, Netgear, etc. Each router is associated with an IP address which is used to access the administrator dashboard of that router. From here, one can configure or manage that router. is one such private IPv4 network address which is associated with some home-use broadband router. To solve any error or to manage the router, one can go to ‘’ this IP address using any web browser and make the necessary changes. ‘’ is more commonly seen in business computer networks than in home networks.

How to Setup Your Router Using

Here, we are going to discuss how to set up a router which is associated to ‘’ this IP address. So let’s get started.

Step 1- Turn on your router and connect it to a device by using a wireless connection. You can also use a network cable to connect your PC/laptop to your router.

Step 2- Once connected, open a web browser on the device which you have connected to your router. Here, type ‘’ in the search bar and hit ‘Enter.’ If this IP does not work then try entering or 192.168.l.l at the browser address bar, this should open your wireless router admin page.

Step 3- You will be directed to the setup page of your router. You will have to log in using the default username and password which is ‘admin.’ Once you log in successfully, a setup wizard will be displayed on your screen using which you set your router step by step.

Step 4- You have to set all the preferences according to your usage. Also, you can modify the password and the SSID of your router from here. You must keep saving the changes made in each category otherwise the changes which you have made will be undone.

Step 5- Once you are done with all the changes which you had to make, and when your router is all set, you must restart your router to apply all the changes which you have made.

Once you change the password of your router, you will have to reconnect your device to your router using the new password which you have set.

Reasons Why You Might Not be Able To Access

If you are not able to access ‘’ this IP address, there might be a few reasons which are listed below:

1. Your router is not turned on or is not ready to use. Be patient till the router is completely turned on and is ready to use.

2. Your router is not associated to ‘’, and you have mistaken it with some other IP address. To know the IP address associated with your router, open CMD and type ‘ipconfig/all‘ and know the correct IP address. Or you can use the command ‘ping’ and if it displays the message ‘Timeout’ then it means that you cannot connect to that IP address through your router.

3. If you are still unable to access ‘’ then, the network port is not specified, or there must be a firewall.

4. Ensure that all the required connections are made properly. Especially the power and the ethernet cable. If they are not connected properly, try putting them back in place.

5. If the problem is still not solved, disconnect all the connections of your router and turn it off. Then, reconnect the connections and restart your router. This should solve the problem.

6. If you are still facing difficulty in accessing the configuration page then, disconnect the device you are using from the router. Then, reconnect your device to the router and try accessing the configuration page again.

Can you assign ‘’ this IP address to a router?

Most of the routers are assigned their IP addresses by using Dynamic Host Configuration Protocol (DHCP). This means that you can reassign a different IP address to your router. But, you may face connection issues if the network’s router is not configured correspondingly.

Each router is configured with a range of private addresses. Hence, you can find out the range of your router’s IP addresses and check whether ‘’ is present in the list or not. If it is, you can assign ‘’ this IP address to your router.


This is all you need to know about ‘’ this IP address. If you still have queries regarding this IP address, then please let us know in the comments section below.